High Voltage Digital Interface Panel Specifications
The High Voltage Panel provides 16 solid-state contacts rated for up to 250 Vdc which can be controlled directly from the Simulator’s digital output ports.
The interface is configured as a panel that mounts in the front of mid and full-size
RTDS cubicles. (Note input channels are also available if required.)
The High Voltage Interface Panel is available in two standard configurations
16 output or 4 input and 12 output.
The interface panel is used either to bring high voltage digital inputs into
the RTDS Simulator or to send digital outputs from the RTDS Simulator to dry
contacts (with high voltage ratings).
Digital Input Modules - the digital input modules are used to input up to
280 Vdc into the RTDS Simulator. Different modules must be used for
different input voltages. The input range can be 180-280 Vdc.
The voltage level must be decided before manufacturing the panel. The typical
time delay of the input module is approximately 20 msec.
Digital Output Modules - the digital output modules are used to control
solid-state contacts using the RTDS Simulator's digital output ports. The output
module solid-state contacts are rated for a maximum of 250 Vdc. A diode connection
is also provided with the panel for the case where inductive loads are
applied. The typical time delay of the output module is approximately 0.5 msec.
| 