Control System Models

The Control System Library allows customized control systems to be created to interact with the model power system and/or the outside world. In addition to individual control blocks, some complex controllers have been assembled as composite controls and are provided (e.g. generator controls). The Control System Software also provides complete flexibility for the development of sequence of events control input. Additionally, a "C" interface is available which allows user defined control blocks.

Control System Component Model Library

Examples of available models include the following groups of components:

User-Input - Slider, switch, button, dial

Constants – integer, floating point, utility

Data conversion- deg -> rad, int->float, etc.

Math functions – exp, log, gain, sqrt, inverse, abs, sum, multiply, divide, fourier transform, integrator, lead-lag, wash-out, etc.

Trigonometric functions – sin, cos, tan, arcsin,arcos, , 3 phase sin, etc.

Standard control blocks - deadband, pulse generator, edge detector, time, counter, ramp, limiters, meters, phase-locked loop, flip-flops, etc.

Logic functions – and, or, nor, bit shift functions, bit -> word, etc.

Sequencer functions – wait, apply fault, close breaker, …

Generator controls – exciters (IEEE Type 1, AC1, ST1, X1, SCRX, IVO, etc.), governors (IEEE Type 1, European BBGOV1, Gas turbine, steam turbine, hydro turbine, etc.), power system stabilizers (PT1ST1, PSS2A, IEEEST, IEE2ST)

Please contact us for more information. We would be happy to provide a complete list of available models or more detailed information on specific models of interest.

RTDS Technologies Inc., 300-137 Innovation Drive, Winnipeg, Manitoba CANADA R3T 6B6
(telephone): +204 989 9700 (fax): +204 452 4303 (email): rtds@rtds.com

Return to Main Page